Fitur Produk
01
Chassis yang dilacak untuk struktur stabilitas tinggi
02
Unit pompa ganda mesin ganda.
03
Teknologi tiang silinder.
04
Sistem kontrol dan pemantauan generasi baru
05
Sistem penggerak tiang pancang enam silinder
06
Generasi baru katup integral
Keamanan tinggi & stabilitas tinggi
Penetrasi batuan yang kuat dan efisien
Biaya penggunaan rendah
Transportasi yang nyaman
Chassis yang dilacak untuk struktur stabilitas tinggi
Unit pompa ganda mesin ganda
Teknologi tiang silinder
Sistem kontrol dan pemantauan generasi baru
Chassis khusus crawler teleskopik tugas berat memastikan keamanan dan stabilitas peralatan konstruksi yang tinggi.
Peralatan rekayasa bawah tanah Sunward telah memelopori pengembangan teknologi remote control.
Peralatan rekayasa bawah tanah Sunward tidak dilengkapi dengan sistem peringatan blind-spot dan pengawasan video sistem.
Mekanisme penjepitan berganda
Teknologi tiang silinder
Teknologi terkemuka dunia
Peralatan Teknik Bawah Tanah-Pelopor di bumi
Keamanan tinggi & stabilitas tinggi, entri batu yang kuat dan efisien, biaya penggunaan rendah, nyaman angkutan Transportasi keseluruhan dengan batang.
Teknologi Sunward telah memimpin tumpukan menekan selama 20 tahun
Pengeboran maksimum 1300mm diameter.
Tinggi mesin 16280mm
Semua produk
Seri Mini SWDM
SWDM Small Miniature Series
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Diamension | L*W*H(Working) | mm | 5445X2600X12640 |
| L*W*H(Transportion) | mm | 8945X2600X3470 | |
| Overall height | mm | 12640 | |
| Total weight | t | 22 | |
| Max.drilling diameter | mm | 1000 | |
| Max.drilling depth | m | 27/20 | |
| Engine | Brand | Cummins | |
| Moder | QSF3.8-SO12319 | ||
| Power | kW/rpm | 93/2200 | |
| Rotary Power Head | Max.torque | kN.m | 60 |
| Rotation speed | rpm | 8~35 | |
| High-speed throwing soil(optional) | rpm | 70 | |
| Pressurized Systems | Max.applied pressure | kN | 100 |
| Max.lifting force | kN | 120 | |
| Max.stroke | mm | 3000 | |
| Main Winch | Max.lifting force | kN | 80 |
| Max.rope speed | m/min | 72 | |
| Aux Winch | Max.lifting force | kN | 30 |
| Max.rope speed | m/min | 50 | |
| Drill Mast | Left and Right tilt | ° | ±3 |
| Forward tilt | ° | 5 | |
| Chassis | Crawler width | mm | 600 |
| Crawler extension width | mm | 2600 | |
| Crawler length | mm | 3765 | |
SWDM Small Miniature Series
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Diamension | L*W*H(Working) | mm | 5445X2600X12640 |
| L*W*H(Transportion) | mm | 8945X2600X3470 | |
| Overall height | mm | 12640 | |
| Total weight | t | 22 | |
| Max.drilling diameter | mm | 1000 | |
| Max.drilling depth | m | 35/25 | |
| Engine | Brand | Cummins | |
| Moder | QSF3.8-SO12319 | ||
| Power | kW/rpm | 93/2200 | |
| Rotary Power Head | Max.torque | kN.m | 60 |
| Rotation speed | rpm | 8~35 | |
| High-speed throwing soil(optional) | rpm | 70 | |
| Pressurized Systems | Max.applied pressure | kN | 100 |
| Max.lifting force | kN | 120 | |
| Max.stroke | mm | 3000 | |
| Main Winch | Max.lifting force | kN | 80 |
| Max.rope speed | m/min | 72 | |
| Aux Winch | Max.lifting force | kN | 30 |
| Max.rope speed | m/min | 50 | |
| Drill Mast | Left and Right tilt | ° | ±3 |
| Forward tilt | ° | 5 | |
| Chassis | Crawler width | mm | 600 |
| Crawler extension width | mm | 2550~3450 | |
| Crawler length | mm | 4260 | |
SWDM Small Miniature Series
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Diamension | L*W*H(Working) | mm | 5445X2600X12640 |
| L*W*H(Transportion) | mm | 8945X2600X3470 | |
| Overall height | mm | 12640 | |
| Total weight | t | 22 | |
| Max.drilling diameter | mm | 1000 | |
| Max.drilling depth | m | 45/35 | |
| Engine | Brand | Cummins | |
| Moder | QSF3.8-SO12319 | ||
| Power | kW/rpm | 93/2200 | |
| Rotary Power Head | Max.torque | kN.m | 60 |
| Rotation speed | rpm | 8~35 | |
| High-speed throwing soil(optional) | rpm | 70 | |
| Pressurized Systems | Max.applied pressure | kN | 100 |
| Max.lifting force | kN | 120 | |
| Max.stroke | mm | 3000 | |
| Main Winch | Max.lifting force | kN | 80 |
| Max.rope speed | m/min | 72 | |
| Aux Winch | Max.lifting force | kN | 30 |
| Max.rope speed | m/min | 50 | |
| Drill Mast | Left and Right tilt | ° | ±3 |
| Forward tilt | ° | 5 | |
| Chassis | Crawler width | mm | 600 |
| Crawler extension width | mm | 2600~3500 | |
| Crawler length | mm | 4450 | |
Seri Menengah SWDM
SWDM Medium Series
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Diamension | L*W*H(Working) | mm | 7910X3980X18490 |
| L*W*H(Transportion) | mm | 15860X2800X3530 | |
| Overall height | mm | 18490 | |
| Total weight | t | 47 | |
| Max.drilling diameter | mm | 1500 | |
| Max.drilling depth | m | 56/44 | |
| Engine | Brand | Cummins | |
| Moder | QSB6.7-C220 | ||
| Power | kW/rpm | 164/2200 | |
| Rotary Power Head | Max.torque | kN.m | 160 |
| Rotation speed | rpm | 6~32 | |
| High-speed throwing soil(optional) | rpm | 70 | |
| Pressurized Systems | Max.applied pressure | kN | 150 |
| Max.lifting force | kN | 160 | |
| Max.stroke | mm | 4000 | |
| Main Winch | Max.lifting force | kN | 160 |
| Max.rope speed | m/min | 70 | |
| Aux Winch | Max.lifting force | kN | 50 |
| Max.rope speed | m/min | 50 | |
| Drill Mast | Left and Right tilt | ° | ±5 |
| Forward tilt | ° | 5 | |
| Chassis | Crawler width | mm | 700 |
| Crawler extension width | mm | 2780~3980 | |
| Crawler length | mm | 4630 | |
SWDM Medium Series
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Diamension | L*W*H(Working) | mm | 8595x4200x20435 |
| L*W*H(Transportion) | mm | 15020x2900x3390 | |
| Overall height | mm | 20435 | |
| Total weight | t | 60 | |
| Max.drilling diameter | mm | 1800 | |
| Max.drilling depth | m | 62/48 | |
| Engine | Brand | cummins | |
| Moder | QSB6.7-C260 | ||
| Power | kW/rpm | 194/2200 | |
| Rotary Power Head | Max.torque | kN.m | 200 |
| Rotation speed | rpm | 6~26 | |
| High-speed throwing soil(optional) | rpm | 70 | |
| Pressurized Systems | Max.applied pressure | kN | 200 |
| Max.lifting force | kN | 210 | |
| Max.stroke | mm | 5000 | |
| Main Winch | Max.lifting force | kN | 170 |
| Max.rope speed | m/min | 75 | |
| Aux Winch | Max.lifting force | kN | 80 |
| Max.rope speed | m/min | 58 | |
| Drill Mast | Left and Right tilt | ° | ±5 |
| Forward tilt | ° | 5 | |
| Chassis | Crawler width | mm | 700 |
| Crawler extension width | mm | 2900~4200 | |
| Crawler length | mm | 5145 | |
SWDM Medium Series
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Diamension | L*W*H(Working) | mm | 9120X4400X22175 |
| L*W*H(Transportion) | mm | 16310X3000X3330 | |
| Overall height | mm | 22175 | |
| Total weight | t | 72 | |
| Max.drilling diameter | mm | 2000 | |
| Max.drilling depth | m | 67/53 | |
| Engine | Brand | Cummins | |
| Moder | QSL9-C325 | ||
| Power | kW/rpm | 242/2100 | |
| Rotary Power Head | Max.torque | kN.m | 245 |
| Rotation speed | rpm | 6~28 | |
| High-speed throwing soil(optional) | rpm | 70 | |
| Pressurized Systems | Max.applied pressure | kN | 210 |
| Max.lifting force | kN | 210 | |
| Max.stroke | mm | 5000 | |
| Main Winch | Max.lifting force | kN | 220 |
| Max.rope speed | m/min | 72 | |
| Aux Winch | Max.lifting force | kN | 80 |
| Max.rope speed | m/min | 58 | |
| Drill Mast | Left and Right tilt | ° | ±5 |
| Forward tilt | ° | 5 | |
| Chassis | Crawler width | mm | 800 |
| Crawler extension width | mm | 3000~4400 | |
| Crawler length | mm | 5145 | |
Seri Besar SWDM
SWDM Large Series
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Diamension | L*W*H(Working) | mm | 10030X4500X23330 |
| L*W*H(Transportion) | mm | 17645X3000X3435 | |
| Overall height | mm | 23330 | |
| Total weight | t | 93 | |
| Max.drilling diameter | mm | 2500 | |
| Max.drilling depth | m | 86/56 | |
| Engine | Brand | Cummins | |
| Moder | QSM11-C335 | ||
| Power | kW/rpm | 250/2100 | |
| Rotary Power Head | Max.torque | kN.m | 300 |
| Rotation speed | rpm | 6~28 | |
| High-speed throwing soil(optional) | rpm | 70 | |
| Pressurized Systems | Max.applied pressure | kN | 260 |
| Max.lifting force | kN | 280 | |
| Max.stroke | mm | 6000 | |
| Main Winch | Max.lifting force | kN | 320 |
| Max.rope speed | m/min | 62 | |
| Aux Winch | Max.lifting force | kN | 110 |
| Max.rope speed | m/min | 65 | |
| Drill Mast | Left and Right tilt | ° | ±4 |
| Forward tilt | ° | 5 | |
| Chassis | Crawler width | mm | 900 |
| Crawler extension width | mm | 3000~4500 | |
| Crawler length | mm | 5700 | |
SWDM Large Series
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Diamension | L*W*H(Working) | mm | 10030X4500X23330 |
| L*W*H(Transportion) | mm | 17645X3000X3435 | |
| Overall height | mm | 23330 | |
| Total weight | t | 93 | |
| Max.drilling diameter | mm | 2500 | |
| Max.drilling depth | m | 95/62 | |
| Engine | Brand | Cummins | |
| Moder | QSM11-C400 | ||
| Power | kW/rpm | 298/2100 | |
| Rotary Power Head | Max.torque | kN.m | 320 |
| Rotation speed | rpm | 6~32 | |
| High-speed throwing soil(optional) | rpm | 70 | |
| Pressurized Systems | Max.applied pressure | kN | 260 |
| Max.lifting force | kN | 280 | |
| Max.stroke | mm | 6000 | |
| Main Winch | Max.lifting force | kN | 320 |
| Max.rope speed | m/min | 80 | |
| Aux Winch | Max.lifting force | kN | 110 |
| Max.rope speed | m/min | 65 | |
| Drill Mast | Left and Right tilt | ° | ±4 |
| Forward tilt | ° | 5 | |
| Chassis | Crawler width | mm | 900 |
| Crawler extension width | mm | 3000~4500 | |
| Crawler length | mm | 5700 | |
SWDM Large Series
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Diamension | L*W*H(Working) | mm | 10030X4500X23330 |
| L*W*H(Transportion) | mm | 17645X3000X3435 | |
| Overall height | mm | 23330 | |
| Total weight | t | 93 | |
| Max.drilling diameter | mm | 2500 | |
| Max.drilling depth | m | 96/62 | |
| Engine | Brand | Cummins | |
| Moder | QSX15-C535 | ||
| Power | kW/rpm | 399/2100 | |
| Rotary Power Head | Max.torque | kN.m | 418 |
| Rotation speed | rpm | 6~25 | |
| High-speed throwing soil(optional) | rpm | / | |
| Pressurized Systems | Max.applied pressure | kN | 340 |
| Max.lifting force | kN | 380 | |
| Max.stroke | mm | 13000 | |
| Main Winch | Max.lifting force | kN | 370 |
| Max.rope speed | m/min | 80 | |
| Aux Winch | Max.lifting force | kN | 110 |
| Max.rope speed | m/min | 65 | |
| Drill Mast | Left and Right tilt | ° | ±4 |
| Forward tilt | ° | 5 | |
| Chassis | Crawler width | mm | 900 |
| Crawler extension width | mm | 3300~4800 | |
| Crawler length | mm | 6120 | |
SWDM Large Series
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Diamension | L*W*H(Working) | mm | 10030X4500X23330 |
| L*W*H(Transportion) | mm | 17645X3000X3435 | |
| Overall height | mm | 23330 | |
| Total weight | t | 93 | |
| Max.drilling diameter | mm | 2500 | |
| Max.drilling depth | m | 102/66 | |
| Engine | Brand | Cummins | |
| Moder | QSX15-C535 | ||
| Power | kW/rpm | 399/2100 | |
| Rotary Power Head | Max.torque | kN.m | 418 |
| Rotation speed | rpm | 6~25 | |
| High-speed throwing soil(optional) | rpm | / | |
| Pressurized Systems | Max.applied pressure | kN | 340 |
| Max.lifting force | kN | 380 | |
| Max.stroke | mm | 13000 | |
| Main Winch | Max.lifting force | kN | 370 |
| Max.rope speed | m/min | 80 | |
| Aux Winch | Max.lifting force | kN | 110 |
| Max.rope speed | m/min | 65 | |
| Drill Mast | Left and Right tilt | ° | ±4 |
| Forward tilt | ° | 5 | |
| Chassis | Crawler width | mm | 900 |
| Crawler extension width | mm | 3300~4800 | |
| Crawler length | mm | 6120 | |
Seri SWDM Super Besar
SWDM Super Large Series
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Diamension | L*W*H(Working) | mm | 10550X5000X28145 |
| L*W*H(Transportion) | mm | 18740X3400X3430 | |
| Overall height | mm | 28145 | |
| Total weight | t | 135 | |
| Max.drilling diameter | mm | 2800 | |
| Max.drilling depth | m | 106/70 | |
| Engine | Brand | cummins | |
| Moder | QSX15-C535 | ||
| Power | kW/rpm | 399/2100 | |
| Rotary Power Head | Max.torque | kN.m | 418 |
| Rotation speed | rpm | 6~25 | |
| High-speed throwing soil(optional) | rpm | / | |
| Pressurized Systems | Max.applied pressure | kN | 340 |
| Max.lifting force | kN | 380 | |
| Max.stroke | mm | 8000 | |
| Main Winch | Max.lifting force | kN | 450 |
| Max.rope speed | m/min | 70 | |
| Aux Winch | Max.lifting force | kN | 110 |
| Max.rope speed | m/min | 65 | |
| Drill Mast | Left and Right tilt | ° | ±4 |
| Forward tilt | ° | 5 | |
| Chassis | Crawler width | mm | 900 |
| Crawler extension width | mm | 3400~5000 | |
| Crawler length | mm | 6560 | |
SWDM Super Large Series
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Diamension | L*W*H(Working) | mm | 10760X5000X31055 |
| L*W*H(Transportion) | mm | 18925X3400X3550 | |
| Overall height | mm | 31055 | |
| Total weight | t | 150 | |
| Max.drilling diameter | mm | 3000 | |
| Max.drilling depth | m | 121/78 | |
| Engine | Brand | Cummins | |
| Moder | QSX15-C600 | ||
| Power | kW/rpm | 447/2100 | |
| Rotary Power Head | Max.torque | kN.m | 450 |
| Rotation speed | rpm | 6~25 | |
| High-speed throwing soil(optional) | rpm | / | |
| Pressurized Systems | Max.applied pressure | kN | 420 |
| Max.lifting force | kN | 420 | |
| Max.stroke | mm | 8000 | |
| Main Winch | Max.lifting force | kN | 480 |
| Max.rope speed | m/min | 70 | |
| Aux Winch | Max.lifting force | kN | 110 |
| Max.rope speed | m/min | 65 | |
| Drill Mast | Left and Right tilt | ° | ±4 |
| Forward tilt | ° | 5 | |
| Chassis | Crawler width | mm | 900 |
| Crawler extension width | mm | 3400~5000 | |
| Crawler length | mm | 7030 | |
SWDM Super Large Series
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Diamension | L*W*H(Working) | mm | 11340X6000X33510 |
| L*W*H(Transportion) | mm | 19940X3400X3600 | |
| Overall height | mm | 33510 | |
| Total weight | t | 185 | |
| Max.drilling diameter | mm | 3500 | |
| Max.drilling depth | m | 125/81 | |
| Engine | Brand | Cummins | |
| Moder | QSX15-C600 | ||
| Power | kW/rpm | 447/2100 | |
| Rotary Power Head | Max.torque | kN.m | 520 |
| Rotation speed | rpm | 5~24 | |
| High-speed throwing soil(optional) | rpm | / | |
| Pressurized Systems | Max.applied pressure | kN | 480 |
| Max.lifting force | kN | 480 | |
| Max.stroke | mm | 9000 | |
| Main Winch | Max.lifting force | kN | 580 |
| Max.rope speed | m/min | 50 | |
| Aux Winch | Max.lifting force | kN | 110 |
| Max.rope speed | m/min | 65 | |
| Drill Mast | Left and Right tilt | ° | ±4 |
| Forward tilt | ° | 5 | |
| Chassis | Crawler width | mm | 1000 |
| Crawler extension width | mm | 6000 | |
| Crawler length | mm | 7640 | |
SWDM Super Large Series
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Diamension | L*W*H(Working) | mm | 11340X6000X35310 |
| L*W*H(Transportion) | mm | 19940X3400X3600 | |
| Overall height | mm | 35310 | |
| Total weight | t | 190 | |
| Max.drilling diameter | mm | 3500 | |
| Max.drilling depth | m | 135/88 | |
| Engine | Brand | Cummins | |
| Moder | QSX15-C600 | ||
| Power | kW/rpm | 447/2100 | |
| Rotary Power Head | Max.torque | kN.m | 550 |
| Rotation speed | rpm | 5~24 | |
| High-speed throwing soil(optional) | rpm | / | |
| Pressurized Systems | Max.applied pressure | kN | 480 |
| Max.lifting force | kN | 500 | |
| Max.stroke | mm | 9000 | |
| Main Winch | Max.lifting force | kN | 600 |
| Max.rope speed | m/min | 50 | |
| Aux Winch | Max.lifting force | kN | 110 |
| Max.rope speed | m/min | 65 | |
| Drill Mast | Left and Right tilt | ° | ±4 |
| Forward tilt | ° | 5 | |
| Chassis | Crawler width | mm | 1000 |
| Crawler extension width | mm | 6000 | |
| Crawler length | mm | 7640 | |
Driver Pile Track Hidraulik Penuh
Full Hydraulic Track Pile Driver
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Engine | Model | QSB6.7-C220 | |
| Rated power | kW | 164 | |
| Maximum torque | N.m/rpm | 949/1500 | |
| Column of pile frame | Length | m | 12、15、18、21、24、27 |
| Diameter | mm | Φ 610 | |
| Spec. of main rail | mm | Φ 102×600 | |
| Specification of auxiliary slideway | mm | Φ 70×330 | |
| Front/rear inclination | ° | ±5 | |
| Left/right inclination | ° | ±1.5 | |
| Maximum lifting force | kN (t) | 372 (38) | |
| Main winch | Single rope speed | m/min | 96/48 |
| Single rope tension | kN | 49 | |
| Rope diameter | mm | 20 | |
| Rope capacity | m | 265 | |
| Auxiliary winch | Single rope speed | m/min | 96/48 |
| Single rope tension | kN | 49 | |
| Rope diameter | mm | 20 | |
| Rope capacity | m | 265 | |
| Hoisting winch (1) | Single rope speed | m/min | 43 |
| Single rope tension | kN | 49 | |
| Rope diameter | mm | 20 | |
| Rope capacity | m | 150 | |
| Hoisting winch (2) | Single rope speed | m/min | –– |
| Single rope tension | kN | –– | |
| Rope diameter | mm | –– | |
| Rope capacity | m | –– | |
| Mast erecting winch | Single rope speed | m/min | –– |
| Single rope tension | kN | –– | |
| Rope diameter | mm | –– | |
| Rope capacity | m | –– | |
| Basket winch | Single rope speed | m/min | –– |
| Single rope tension | kN | –– | |
| Rope diameter | mm | –– | |
| Rope capacity | m | –– | |
| Crawler chassis | Maximum width of extended crawlers | mm | 4560 |
| Maximum width of retracted crawlers | mm | 3300 | |
| Crawler width | mm | 760 | |
| Crawler length | mm | 5660 | |
| Central distance of crawlers | mm | 4800 | |
| Traveling speed | km/h | 0.8～1.3 | |
| Slewing rpm of upper structure | r/min | 1～2 | |
| Climbing capacity | ° | 21.8 | |
| Boundary dimension | In working status | m | 7.65×4.56×29.2 |
| In transport status | m | 17×3.3×3.52 | |
| Counterweight | t | 12 | |
| Machine weight | t | 38 | |
| Maximum allowed traveling weight of the | t | 95 | |
| Ground contact area | m2 | 7.296 | |
| Ground contact pressure | Mpa | 0.128 | |
Full Hydraulic Track Pile Driver
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Engine | Model | QSB6.7-C260 | |
| Rated power | kW | 194 | |
| Maximum torque | N.m/rpm | 987/1500 | |
| Column of pile frame | Length | m | 21 24 27 30 33 36 (39) |
| Diameter | mm | Φ 820 | |
| Spec. of main rail | mm | Φ 102×600 | |
| Specification of auxiliary slideway | mm | Φ 70×330 | |
| Front/rear inclination | ° | ±5 | |
| Left/right inclination | ° | ±1.5 | |
| Maximum lifting force | kN (t) | 666 (68) | |
| Main winch | Single rope speed | m/min | 96/48 |
| Single rope tension | kN | 49 | |
| Rope diameter | mm | 20 | |
| Rope capacity | m | 550 | |
| Auxiliary winch | Single rope speed | m/min | 96/48 |
| Single rope tension | kN | 49 | |
| Rope diameter | mm | 20 | |
| Rope capacity | m | 550 | |
| Hoisting winch (1) | Single rope speed | m/min | 43 |
| Single rope tension | kN | 49 | |
| Rope diameter | mm | 20 | |
| Rope capacity | m | 150 | |
| Hoisting winch (2) | Single rope speed | m/min | –– |
| Single rope tension | kN | –– | |
| Rope diameter | mm | –– | |
| Rope capacity | m | –– | |
| Mast erecting winch | Single rope speed | m/min | 47 |
| Single rope tension | kN | 98 | |
| Rope diameter | mm | 22/44 | |
| Rope capacity | m | 226 | |
| Basket winch | Single rope speed | m/min | 6.4 |
| Single rope tension | kN | 12 | |
| Rope diameter | mm | 14 | |
| Rope capacity | m | 110 | |
| Crawler chassis | Maximum width of extended crawlers | mm | 4700 |
| Maximum width of retracted crawlers | mm | 3300 | |
| Crawler width | mm | 800 | |
| Crawler length | mm | 6074 | |
| Central distance of crawlers | mm | 5165 | |
| Traveling speed | km/h | 0.6～1.1 | |
| Slewing rpm of upper structure | r/min | 0.8～1 | |
| Climbing capacity | ° | 21.8 | |
| Boundary dimension | In working status | m | 10.3×6.3×38.6 |
| In transport status | m | 10.7×3.3×3.57 | |
| Counterweight | t | 18.5 | |
| Machine weight | t | 53.8 | |
| Maximum allowed traveling weight of the | t | 143 | |
| Ground contact area | m2 | 8.264 | |
| Ground contact pressure | Mpa | 0.169 | |
Full Hydraulic Track Pile Driver
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Engine | Model | QSB6.7-C260 | |
| Rated power | kW | 194 | |
| Maximum torque | N.m/rpm | 987/1500 | |
| Column of pile frame | Length | m | 21 24 27 30 33 36 (39) (42) |
| Diameter | mm | Φ 820 | |
| Spec. of main rail | mm | Φ 102×1000 | |
| Specification of auxiliary slideway | mm | Φ 70×330 | |
| Front/rear inclination | ° | ±5 | |
| Left/right inclination | ° | ±1.5 | |
| Maximum lifting force | kN (t) | 666 (68) | |
| Main winch | Single rope speed | m/min | 96/48 |
| Single rope tension | kN | 49 | |
| Rope diameter | mm | 20 | |
| Rope capacity | m | 550 | |
| Auxiliary winch | Single rope speed | m/min | 96/48 |
| Single rope tension | kN | 49 | |
| Rope diameter | mm | 20 | |
| Rope capacity | m | 550 | |
| Hoisting winch (1) | Single rope speed | m/min | 43 |
| Single rope tension | kN | 49 | |
| Rope diameter | mm | 20 | |
| Rope capacity | m | 130 | |
| Hoisting winch (2) | Single rope speed | m/min | 40 |
| Single rope tension | kN | 49 | |
| Rope diameter | mm | 20 | |
| Rope capacity | m | 130 | |
| Mast erecting winch | Single rope speed | m/min | 47 |
| Single rope tension | kN | 98 | |
| Rope diameter | mm | 22/44 | |
| Rope capacity | m | 226 | |
| Basket winch | Single rope speed | m/min | 6.4 |
| Single rope tension | kN | 12 | |
| Rope diameter | mm | 14 | |
| Rope capacity | m | 110 | |
| Crawler chassis | Maximum width of extended crawlers | mm | 5000 |
| Maximum width of retracted crawlers | mm | 3360 | |
| Crawler width | mm | 860 | |
| Crawler length | mm | 6207 | |
| Central distance of crawlers | mm | 5295 | |
| Traveling speed | km/h | 0.6～1.1 | |
| Slewing rpm of upper structure | r/min | 0.8～1 | |
| Climbing capacity | ° | 21.8 | |
| Boundary dimension | In working status | m | 10.5×6.3×38.7 |
| In transport status | m | 10.7×3.36×3.57 | |
| Counterweight | t | 19 | |
| Machine weight | t | 60.5 | |
| Maximum allowed traveling weight of the | t | 160 | |
| Ground contact area | m2 | 9.107 | |
| Ground contact pressure | Mpa | 0.172 | |
Full Hydraulic Track Pile Driver
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Engine | Model | QSB6.7-C260 | |
| Rated power | kW | 194 | |
| Maximum torque | N.m/rpm | 987/1500 | |
| Column of pile frame | Length | m | 21 24 27 30 33 36 39 (42) (45) (48) |
| Diameter | mm | Φ 920 | |
| Spec. of main rail | mm | Φ 102×1000 | |
| Specification of auxiliary slideway | mm | Φ 70×330 | |
| Front/rear inclination | ° | ±5 | |
| Left/right inclination | ° | ±1.5 | |
| Maximum lifting force | kN (t) | 784 (80) | |
| Main winch | Single rope speed | m/min | 96/48 |
| Single rope tension | kN | 58.8 | |
| Rope diameter | mm | 22 | |
| Rope capacity | m | 550 | |
| Auxiliary winch | Single rope speed | m/min | 96/48 |
| Single rope tension | kN | 58.8 | |
| Rope diameter | mm | 22 | |
| Rope capacity | m | 550 | |
| Hoisting winch (1) | Single rope speed | m/min | 43 |
| Single rope tension | kN | 58.8 | |
| Rope diameter | mm | 22 | |
| Rope capacity | m | 160 | |
| Hoisting winch (2) | Single rope speed | m/min | –– |
| Single rope tension | kN | –– | |
| Rope diameter | mm | –– | |
| Rope capacity | m | –– | |
| Mast erecting winch | Single rope speed | m/min | 47 |
| Single rope tension | kN | 98 | |
| Rope diameter | mm | 22/44 | |
| Rope capacity | m | 240 | |
| Basket winch | Single rope speed | m/min | 6.4 |
| Single rope tension | kN | 12 | |
| Rope diameter | mm | 14 | |
| Rope capacity | m | 110 | |
| Crawler chassis | Maximum width of extended crawlers | mm | 5180 |
| Maximum width of retracted crawlers | mm | 3480 | |
| Crawler width | mm | 960 | |
| Crawler length | mm | 6338 | |
| Central distance of crawlers | mm | 5425 | |
| Traveling speed | km/h | 0.6～1.1 | |
| Slewing rpm of upper structure | r/min | 0.8～1 | |
| Climbing capacity | ° | 21.8 | |
| Boundary dimension | In working status | m | 11.3×6.2×41.3 |
| In transport status | m | 11.6×3.48×3.66 | |
| Counterweight | t | 25.5 | |
| Machine weight | t | 64.9 | |
| Maximum allowed traveling weight of the | t | 190 | |
| Ground contact area | m2 | 10.416 | |
| Ground contact pressure | Mpa | 0.179 | |
Bor Hammer Lubang Bawah Besar
Large Diameter Down-The-Hole Hammer Drill
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Maximum drilling diameter | mm | Φ1016 | |
| Maximum drilling depth | m | 80 | |
| Overall dimensions | Working status | m | 9.6×4.2×20.8 |
| Transportation status | m | 15.7×2.9×3.4 | |
| Engine | Model | QSB6.7-C260 | |
| Rated power | kw/rpm | 194/2200 | |
| Power unit | Maximum torque output | kN.m | 120 |
| Maximum speed | r/min | 20 | |
| Main winch | Maximum winch force | KN | 680(4倍率) |
| Maximum winch speed | m/min | 18 | |
| Auxiliary winch | Maximum winch force | KN | 80 |
| Maximum winch speed | m/min | 55 | |
| Booster winch | Maximum winch force | KN | 100 |
| Maximum winch speed | m/min | 36 | |
| Inclination angle of drilling mast | Lateral inclination | ° | ±5 |
| Forward inclination | ° | 5 | |
| Backward inclination | ° | 90 | |
| Slewing platform | Slewing angle | ° | 360 |
| Slewing speed | r/min | 3 | |
| Chassis | Maximum traveling speed | km/h | 1.5 |
| Maximum gradeability | ° | 15 | |
| Crawler width | mm | 700 | |
| Telescoping width of crawler | mm | 2900～4200 | |
Rig Pengeboran Dinding Kontinyu Tipe Tiga Sumbu Berjalan
Walking Type Three-Axis Continuous Wall Drilling Rig
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Drilling diameter of single drill pipe × number of drill pipes | mm | Φ650×3 | |
| Two center distance | mm | 450 | |
| The maximum drilling depth stir | m | 30（standard） | |
| Drill pipe diameter | mm | 219 | |
| Motor power of pile frame | kW | 55 | |
| Power head motor power | kW | 110（2×55） | |
| Power Head | Single shaft rated output torque | kN.m | 21.8 |
| Speed of drill pipe | rpm | 16.5 | |
| Main winch | Pull force in single rope | kN | 91.5 |
| Speed | m/min | 0～25 | |
| Steel rope diameter | mm | 22 | |
| Needed rope length | m | 550 | |
| Vertical frame winch | Pull force in single rope | kN | 120 |
| Steel rope diameter | mm | 22 | |
| Lifting hook winch | Pull force in single rope | kN | 20 |
| Speed | m/min | 16 | |
| Pile frame stud | Stub Diameter | mm | Φ920 |
| Stub Length | m | 24～39 | |
| Sliding rail | mm | Φ102×600 | |
| Crawler chassis and machine body | Vertical travel speed | m/min | Approxiately 5 |
| Vertical Step length | mm | 3100 | |
| Horizontal l travel speed | m/min | Approxiately 2.5 | |
| Horizontal step length | mm | 800 | |
| Vertical track shoe L | mm | 9500 | |
| Vertical track shoe W | mm | 1200 | |
| Horizontal track shoe L | mm | 6900 | |
| Horizontal track shoe W | mm | 1700 | |
| Machine dimension(L×W×H) | Working | m | 15×9.5×41 |
| Shipping | m | 12.3×3.4×3.4 | |
| Machine weight | t | Approxiately 155（standard） | |
| Ground pressure | Mpa | 0.07（standard） | |
Walking Type Three-Axis Continuous Wall Drilling Rig
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Drilling diameter of single drill pipe × number of drill pipes | mm | Φ850×3 | |
| Two center distance | mm | 600 | |
| The maximum drilling depth stir | m | 30（standard） | |
| Drill pipe diameter | mm | 273 | |
| Motor power of pile frame | kW | 55 | |
| Power head motor power | kW | 180（2×90） | |
| Power Head | Single shaft rated output torque | kN.m | 39 |
| Speed of drill pipe | rpm | 15 | |
| Main winch | Pull force in single rope | kN | 91.5 |
| Speed | m/min | 0～25 | |
| Steel rope diameter | mm | 22 | |
| Needed rope length | m | 550 | |
| Vertical frame winch | Pull force in single rope | kN | 120 |
| Steel rope diameter | mm | 22 | |
| Lifting hook winch | Pull force in single rope | kN | 20 |
| Speed | m/min | 16 | |
| Pile frame stud | Stub Diameter | mm | Φ920 |
| Stub Length | m | 24～39 | |
| Sliding rail | mm | Φ102×600 | |
| Crawler chassis and machine body | Vertical travel speed | m/min | Approxiately 5 |
| Vertical Step length | mm | 3100 | |
| Horizontal l travel speed | m/min | Approxiately 2.5 | |
| Horizontal step length | mm | 800 | |
| Vertical track shoe L | mm | 9500 | |
| Vertical track shoe W | mm | 1200 | |
| Horizontal track shoe L | mm | 6900 | |
| Horizontal track shoe W | mm | 1700 | |
| Machine dimension(L×W×H) | Working | m | 15×9.5×41 |
| Shipping | m | 12.3×3.4×3.4 | |
| Machine weight | t | Approxiately 176（standard） | |
| Ground pressure | Mpa | 0.08（standard） | |
Walking Type Three-Axis Continuous Wall Drilling Rig
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Drilling diameter of single drill pipe × number of drill pipes | mm | Φ1000×3 | |
| Two center distance | mm | 750 | |
| The maximum drilling depth stir | m | 30（standard） | |
| Drill pipe diameter | mm | 273 | |
| Motor power of pile frame | kW | 55 | |
| Power head motor power | kW | 225（3×75） | |
| Power Head | Single shaft rated output torque | kN.m | 46 |
| Speed of drill pipe | rpm | 16 | |
| Main winch | Pull force in single rope | kN | 91.5 |
| Speed | m/min | 0～25 | |
| Steel rope diameter | mm | 22 | |
| Needed rope length | m | 550 | |
| Vertical frame winch | Pull force in single rope | kN | 120 |
| Steel rope diameter | mm | 22 | |
| Lifting hook winch | Pull force in single rope | kN | 20 |
| Speed | m/min | 16 | |
| Pile frame stud | Stub Diameter | mm | Φ920 |
| Stub Length | m | 24～39 | |
| Sliding rail | mm | Φ102×600 | |
| Crawler chassis and machine body | Vertical travel speed | m/min | Approxiately 5 |
| Vertical Step length | mm | 3100 | |
| Horizontal l travel speed | m/min | Approxiately 2.5 | |
| Horizontal step length | mm | 800 | |
| Vertical track shoe L | mm | 9500 | |
| Vertical track shoe W | mm | 1200 | |
| Horizontal track shoe L | mm | 6900 | |
| Horizontal track shoe W | mm | 1700 | |
| Machine dimension(L×W×H) | Working | m | 15×9.5×41 |
| Shipping | m | 12.3×3.4×3.4 | |
| Machine weight | t | Approxiately 180（standard） | |
| Ground pressure | Mpa | 0.08（standard） | |
Ambil Dinding Hidraulik
Hydraulic Wall Grab
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Groove width | m | 0.35~1.2 | ||
| Groove depth | m | 62 | ||
| Groove length | m | 2.8 | ||
| Maximum lift | kN | 28 | ||
| Grab open time | sec | 32 | ||
| Grab close time | sec | 420 | ||
| Lifting speed loaded | m/min | 5.7 | ||
| Hollow lower speed | m/min | 6.8 | ||
| Total weight (not contain the grab) | Mpa | 35 | ||
| Hydraulic System | Max. working pressure | Main pump | Mpa | 60 |
| Auxiliar pump | T | 62 | ||
| Max. flow rate | Auxiliar pump | L/min | 2×210 | |
| Main pump | L/min | 90 | ||
| Dimension | Working position | mm | 12918×3000×3400 | |
| Conveying state | mm | 10100×4400×17450 | ||
| Engine | Model | QSM11-335 | ||
| Rated power | kw/rpm | 250 / 2100 | ||
| Max. torque | N.m/rpm | 1674 / 1400 | ||
| Main Winch | Max. single rope | kN | 210 | |
| Max. single rope speed | m/min | 70 | ||
| Diameter of wire rope | mm | 28 | ||
| Rotation | Angle of rotation | ° | 360 | |
| Speed of rotation | r/min | 3 | ||
| Domain | Max. traveling speed | km/h | 3.5 | |
| Max. gradeability | % | 15 | ||
| Min. ground clearance | mm | 325 | ||
| Track width | mm | 800 | ||
| Track flexible width | mm | 3000~4400 | ||
| Track portrait tread | mm | 4720 | ||
| Ground pressure | kg/cm² | 0.856 | ||
Rig Jangkar Batang Multifungsi
Multifunctional Anchor Rod Rig
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Max. drilling depth | mm | 305 | |
| Max. drilling dia. | mm | 3780 | |
| Motor | Brand | Cummins QSB4.5 | |
| Power rating | kw/rpm | 110 / 2300 | |
| Max. torque | N.m/rpm | 598 / 1500 | |
| Hydraulic system | Max. operating pressure | Mpa | 25 |
| Max. flow of primary pump | L/min | 150×2 | |
| Max. flow of auxiliary pump | L/min | 50 | |
| Power unit | Max. output torque | N.m | 9700 |
| Impact frequency of impinger | rpm | 110 | |
| Impact energy of impinger | min-1 | 1200 / 1800 / 2500 | |
| Max. rotary speed of primary shaft | J | 590 / 400 / 340 | |
| Propulsion System | Max. propulsion force | kN | 48 |
| Max. lifting force | kN | 80 | |
| Vertical travel of power unit | mm | 4360 | |
| Horizontal travel of power unit | mm | 800 | |
| Adjusting Angle of Drilling Cramp | Lifting angle of moving arm | ° | -26~64 |
| Front and rear inclined angle | ° | 0~122 | |
| Rotary angle of drilling cramp | ° | 0~88 | |
| Horizontal travel of drilling cramp | mm | 1000 | |
| Retainer | Retaining capacity | mm | 40~254 |
| Retaining force | kN | 196 | |
| Inverse torsion | kN.m | 45 | |
| Chassis | Max. traveling speed | km h | 2.3 |
| Max. slope crawling capacity | ° | 30 | |
| Width of crawler | mm | 400 | |
| Wheel distance | mm | 2413 | |
| Grounding pressure | kPa | 70 | |
| External Dimensions | Operating status (L*W*H) | m | 6.93×2.25×6.84 |
| Transporting status (L*W*H) | m | 7.46×2.25×2.8 | |
| Operating mass | kg | 13800 | |
Rig Pengeboran Multifungsi Yang Kuat
Powerful Multifunctional Drilling Rig
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Max. drilling diameter | mm | φ1000 | |
| Engine | Brand | QSB6.7-C260 | |
| Model | kW/rpm | 194/2200 | |
| Max. torque | N.m/rpm | 987/1500 | |
| Outer Rotary Head | Torque | kN.m | 250 |
| Rev. | rpm | 3.5～10 | |
| Weight | t | App. 7 | |
| Inner Rotary Head | Torque | kN.m | 120 |
| Rev. | rpm | 7～22 | |
| Weight | t | App.5.5 | |
| Main Winch(Outer Rotary Head) | Pull force in single rope | kN | 98 |
| Steel frope diameter | mm | 26/44 | |
| Needed rope length | m | 280 | |
| Aux Winch(Inner Rotary Head) | Pull force in single rope | kN | 61.25 |
| Steel frope diameter | mm | 22 | |
| Needed rope length | m | 350 | |
| Vertical Frame Winch | Pull force in single rope | kN | 98 |
| Steel frope diameter | mm | 22/40 | |
| Needed rope length | m | 175 | |
| Lifting Hook Winch | Pull force in single rope | kN | 78 |
| Steel frope diameter | mm | 22 | |
| Needed rope length | m | 100 | |
| Manned Winch | Pull force in single rope | kN | 10 |
| Steel frope diameter | mm | 14 | |
| Needed rope length | m | 90 | |
| Pile Frame Stud | Stud diameter | mm | φ920 |
| Stud length | m | 21～36 | |
| Main rack dimension | mm | φ102×600 | |
| Aux rack dimension | mm | φ70×330 | |
| Left and Right tilt | ° | ±10 | |
| Forward and Backwardt tilt | ° | ±2 | |
| Max. lifting force | kN (t) | 784 (80) | |
| Crawler Chassis | Crawler extend width | mm | 5000 |
| Crawler retract width | mm | 3300 | |
| Track shoe width | mm | 860 | |
| Travel speed | km/h | 0.6～1.2 | |
| Upper-carriage swing speed | rpm | 0.6～1.0 | |
| Upper-carriage swing angle | ° | 360 | |
| Machine Dimension(L×W×H) | Working status | m | 12.50×6.23×38.85 |
| Transport status | m | 11.43×3.30×3.53 | |
| Counterweight weight | t | 25.5（8＋7.5＋5.5） | |
| Machine weight | t | App. 70 | |
| Allowable max. travel weight | t | App. 150 | |
| Ground area | m2 | 9.3912 | |
| Ground pressure | Mpa | 0.159 | |
Powerful Multifunctional Drilling Rig
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Max. drilling diameter | mm | φ1000 | |
| Engine | Brand | QSB6.7-C260 | |
| Model | kW/rpm | 194/2200 | |
| Max. torque | N.m/rpm | 987/1500 | |
| Outer Rotary Head | Torque | kN.m | 250 |
| Rev. | rpm | 3.5～10 | |
| Weight | t | App. 7 | |
| Inner Rotary Head | Torque | kN.m | 180 |
| Rev. | rpm | 7～22 | |
| Weight | t | App.5.5 | |
| Main Winch(Outer Rotary Head) | Pull force in single rope | kN | 98 |
| Steel frope diameter | mm | 26/44 | |
| Needed rope length | m | 280 | |
| Aux Winch(Inner Rotary Head) | Pull force in single rope | kN | 61.25 |
| Steel frope diameter | mm | 22 | |
| Needed rope length | m | 350 | |
| Vertical Frame Winch | Pull force in single rope | kN | 98 |
| Steel frope diameter | mm | 22/40 | |
| Needed rope length | m | 175 | |
| Lifting Hook Winch | Pull force in single rope | kN | 78 |
| Steel frope diameter | mm | 22 | |
| Needed rope length | m | 100 | |
| Manned Winch | Pull force in single rope | kN | 10 |
| Steel frope diameter | mm | 14 | |
| Needed rope length | m | 90 | |
| Pile Frame Stud | Stud diameter | mm | φ920 |
| Stud length | m | 21～36 | |
| Main rack dimension | mm | φ102×600 | |
| Aux rack dimension | mm | φ70×330 | |
| Left and Right tilt | ° | ±10 | |
| Forward and Backwardt tilt | ° | ±2 | |
| Max. lifting force | kN (t) | 784 (80) | |
| Crawler Chassis | Crawler extend width | mm | 5000 |
| Crawler retract width | mm | 3300 | |
| Track shoe width | mm | 860 | |
| Travel speed | km/h | 0.6～1.2 | |
| Upper-carriage swing speed | rpm | 0.6～1.0 | |
| Upper-carriage swing angle | ° | 360 | |
| Machine Dimension(L×W×H) | Working status | m | 12.50×6.23×38.85 |
| Transport status | m | 11.43×3.30×3.53 | |
| Counterweight weight | t | 25.5（8＋7.5＋5.5） | |
| Machine weight | t | App. 70 | |
| Allowable max. travel weight | t | App. 150 | |
| Ground area | m2 | 9.3912 | |
| Ground pressure | Mpa | 0.159 | |
Powerful Multifunctional Drilling Rig
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Max. drilling diameter | mm | φ1200 | |
| Engine | Brand | QSB6.7-C260 | |
| Model | kW/rpm | 194/2200 | |
| Max. torque | N.m/rpm | 987/1500 | |
| Outer Rotary Head | Torque | kN.m | 360 |
| Rev. | rpm | 3～9.7 | |
| Weight | t | App8.5 | |
| Inner Rotary Head | Torque | kN.m | 120 |
| Rev. | rpm | 7～22 | |
| Weight | t | App.5.5 | |
| Main Winch(Outer Rotary Head) | Pull force in single rope | kN | 98 |
| Steel frope diameter | mm | 26/44 | |
| Needed rope length | m | 280 | |
| Aux Winch(Inner Rotary Head) | Pull force in single rope | kN | 61.25 |
| Steel frope diameter | mm | 22 | |
| Needed rope length | m | 350 | |
| Vertical Frame Winch | Pull force in single rope | kN | 98 |
| Steel frope diameter | mm | 22/40 | |
| Needed rope length | m | 175 | |
| Lifting Hook Winch | Pull force in single rope | kN | 78 |
| Steel frope diameter | mm | 22 | |
| Needed rope length | m | 100 | |
| Manned Winch | Pull force in single rope | kN | 10 |
| Steel frope diameter | mm | 14 | |
| Needed rope length | m | 90 | |
| Pile Frame Stud | Stud diameter | mm | φ920 |
| Stud length | m | 21～36 | |
| Main rack dimension | mm | φ102×850 | |
| Aux rack dimension | mm | φ70×330 | |
| Left and Right tilt | ° | ±10 | |
| Forward and Backwardt tilt | ° | ±2 | |
| Max. lifting force | kN (t) | 784 (80) | |
| Crawler Chassis | Crawler extend width | mm | 5380 |
| Crawler retract width | mm | 3480 | |
| Track shoe width | mm | 960 | |
| Travel speed | km/h | 0.6～1.2 | |
| Upper-carriage swing speed | rpm | 0.6～1.0 | |
| Upper-carriage swing angle | ° | 360 | |
| Machine Dimension(L×W×H) | Working status | m | 12.50×6.23×38.85 |
| Transport status | m | 11.43×3.48×3.53 | |
| Counterweight weight | t | 25.5（8＋7.5＋5.5） | |
| Machine weight | t | App. 75 | |
| Allowable max. travel weight | t | App. 170 | |
| Ground area | m2 | App. 10.42 | |
| Ground pressure | Mpa | 0.163 | |
Powerful Multifunctional Drilling Rig
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Max. drilling diameter | mm | φ1500 | |
| Engine | Brand | QSB6.7-C260 | |
| Model | kW/rpm | 194/2200 | |
| Max. torque | N.m/rpm | 987/1500 | |
| Outer Rotary Head | Torque | kN.m | 360 |
| Rev. | rpm | 3～9.7 | |
| Weight | t | App8.5 | |
| Inner Rotary Head | Torque | kN.m | 180 |
| Rev. | rpm | 5.5~19.6 | |
| Weight | t | App.7.1 | |
| Main Winch(Outer Rotary Head) | Pull force in single rope | kN | 98 |
| Steel frope diameter | mm | 26/44 | |
| Needed rope length | m | 280 | |
| Aux Winch(Inner Rotary Head) | Pull force in single rope | kN | 61.25 |
| Steel frope diameter | mm | 22 | |
| Needed rope length | m | 350 | |
| Vertical Frame Winch | Pull force in single rope | kN | 98 |
| Steel frope diameter | mm | 22/40 | |
| Needed rope length | m | 175 | |
| Lifting Hook Winch | Pull force in single rope | kN | 78 |
| Steel frope diameter | mm | 22 | |
| Needed rope length | m | 100 | |
| Manned Winch | Pull force in single rope | kN | 10 |
| Steel frope diameter | mm | 14 | |
| Needed rope length | m | 90 | |
| Pile Frame Stud | Stud diameter | mm | φ920 |
| Stud length | m | 21～36 | |
| Main rack dimension | mm | φ102×850 | |
| Aux rack dimension | mm | φ70×330 | |
| Left and Right tilt | ° | ±10 | |
| Forward and Backwardt tilt | ° | ±2 | |
| Max. lifting force | kN (t) | 784 (80) | |
| Crawler Chassis | Crawler extend width | mm | 5380 |
| Crawler retract width | mm | 3480 | |
| Track shoe width | mm | 960 | |
| Travel speed | km/h | 0.6～1.2 | |
| Upper-carriage swing speed | rpm | 0.6～1.0 | |
| Upper-carriage swing angle | ° | 360 | |
| Machine Dimension(L×W×H) | Working status | m | 12.50×6.23×38.85 |
| Transport status | m | 11.43×3.48×3.53 | |
| Counterweight weight | t | 25.5（8＋7.5＋5.5） | |
| Machine weight | t | App. 75 | |
| Allowable max. travel weight | t | App. 170 | |
| Ground area | m2 | App. 10.42 | |
| Ground pressure | Mpa | 0.163 | |
Diameter Besar Saat Pengeboran
Large Diameter While Drilling
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Max. drilling diameter | mm | 1020 | |
| Max. drilling depth | m | 60 | |
| Minimum working radius | mm | 3070 | |
| Engine | Model | QSL9-C325 | |
| Rated power | kW/rpm | 242/2100 | |
| Max. torque | N·m/rpm | 1424/1500 | |
| Hydraulic system | Max. working pressure | Mpa | 主泵32 |
| Mpa | 副泵28 | ||
| Max. flow | l/min | 主泵520 | |
| l/min | 副泵140 | ||
| Power head | Rated torque | kN.m | 220 |
| RPM | rpm | 0~26 | |
| Stroke | m | 12.8 | |
| vibrator | Maximum excitation force | kN | 400 |
| Excitation frequency | Hz | 45 | |
| Pile controller | Holding capacity of pile controller | kN | 500 |
| Diameter of holding the pile controller | mm | 800~1000 | |
| Main hoister | Maximum pulling force | kN | 420 |
| Maximum lifting and descending speed | m/min | 33.5 | |
| Maximum pressurization | kN | 250 | |
| Vertical hoister | Maximum lifting capacity | kN | 660 |
| Maximum lifting speed | m/min | 9 | |
| Tensile force of single rope | kN | 110 | |
| Man-riding hoister | Maximum lifting capacity | kN | 10 |
| Maximum lifting speed | m/min | 30 | |
| Pile frame adjustment | Forward and backward inclination | ° | ±5 |
| Left and right inclination | ° | ±3 | |
| Slewing table | Slewing angle | ° | 360 |
| Slewing speed | r/min | 3 | |
| Chassis (transport status) | Maximum traveling speed | km/h | 1.75 |
| Maximum climbing capacity | ° | 15 | |
| Track width | mm | 900 | |
| Track gauge | mm | 2100~3600 | |
| Wheelbase | mm | 4726 | |
| Outline dimension (L×W×H) | m | 9.5×3×3.35 | |
| Outline dimension (operation status) | Outline dimension (L×W×H) | m | 12.3×4.5×20.8 |
| Machine weight (including the pile controller and excluding the drill and precast pipe pile) | t | 84 | |
Driver Tumpukan Statis Hidraulik
Hydraulic Static Pile Driver
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Overall dimensions | Working length | mm | 6650 |
| Working width | mm | 4100 | |
| Transportation height | mm | 3580 | |
| Maximum pile driving force | tf | 90 | |
| Minimum pile driving speed | m/min | 2.4 | |
| Maximum pile driving speed | m/min | 8.3 | |
| Maximum pile driving speed | Longitudinal travel | m | 1.6 |
| Lateral travel | m | 0.4 | |
| Steering angle | ° | 14 | |
| Lifting/lowering travel | m | 1.4 | |
| Standard hoist | QY8C | ||
| Maximum hoisting length for center piles | m | 9 | |
| Ground pressure | Long ship | Kpa | 100 |
| Short ship | Kpa | 119 | |
| Border pile spacing | mm | 340 | |
| Minimum corner pile spacing | mm | 340 | |
| Maximum installable round pile clamping jaws | mm | 350/400 | |
| Maximum installable square pile clamping jaws | mm | 350/400 | |
| Optional pile clamping box | 3522/4022 | ||
Hydraulic Static Pile Driver
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Overall dimensions | Working length | mm | 10322 |
| Working width | mm | 4800 | |
| Transportation height | mm | 3350 | |
| Maximum pile driving force | tf | 200 | |
| Minimum pile driving speed | m/min | 1.3 | |
| Maximum pile driving speed | m/min | 9 | |
| Maximum pile driving speed | Longitudinal travel | m | 2.2 |
| Lateral travel | m | 0.4 | |
| Steering angle | ° | 10 | |
| Lifting/lowering travel | m | 1.4 | |
| Standard hoist | QY12D | ||
| Maximum hoisting length for center piles | m | 14 | |
| Ground pressure | Long ship | Kpa | 14.1 |
| Short ship | Kpa | 14.2 | |
| Border pile spacing | mm | 600 | |
| Minimum corner pile spacing | mm | 657 | |
| Maximum installable round pile clamping jaws | mm | Φ400 | |
| Maximum installable square pile clamping jaws | mm | 400 | |
| Optional pile clamping box | 4025 | ||
Hydraulic Static Pile Driver
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Overall dimensions | Working length | mm | 11800 |
| Working width | mm | 6200 | |
| Transportation height | mm | 3141 | |
| Maximum pile driving force | tf | 260 | |
| Minimum pile driving speed | m/min | 1.12 | |
| Maximum pile driving speed | m/min | 8.1 | |
| Maximum pile driving speed | Longitudinal travel | m | 3 |
| Lateral travel | m | 0.6 | |
| Steering angle | ° | 8 | |
| Lifting/lowering travel | m | 0.9 | |
| Standard hoist | QY12D | ||
| Maximum hoisting length for center piles | m | 14 | |
| Ground pressure | Long ship | Kpa | 99 |
| Short ship | Kpa | 121 | |
| Border pile spacing | mm | 860 | |
| Minimum corner pile spacing | mm | 1570 | |
| Maximum installable round pile clamping jaws | mm | 500 | |
| Maximum installable square pile clamping jaws | mm | 500 | |
| Optional pile clamping box | 5022 | ||
Hydraulic Static Pile Driver
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Overall dimensions | Working length | mm | 13133 |
| Working width | mm | 6530 | |
| Transportation height | mm | 3238 | |
| Maximum pile driving force | tf | 360 | |
| Minimum pile driving speed | m/min | 1.4 | |
| Maximum pile driving speed | m/min | 7.2 | |
| Maximum pile driving speed | Longitudinal travel | m | 3 |
| Lateral travel | m | 0.6 | |
| Steering angle | ° | 10 | |
| Lifting/lowering travel | m | 0.9 | |
| Standard hoist | QY12C | ||
| Maximum hoisting length for center piles | m | 14 | |
| Ground pressure | Long ship | Kpa | 122 |
| Short ship | Kpa | 145 | |
| Border pile spacing | mm | 1240 | |
| Minimum corner pile spacing | mm | 1620 | |
| Maximum installable round pile clamping jaws | mm | 600 | |
| Maximum installable square pile clamping jaws | mm | 600 | |
| Optional pile clamping box | 6025 | ||
Hydraulic Static Pile Driver
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Overall dimensions | Working length | mm | 13400 |
| Working width | mm | 7310 | |
| Transportation height | mm | 3386 | |
| Maximum pile driving force | tf | 460 | |
| Minimum pile driving speed | m/min | 0.95 | |
| Maximum pile driving speed | m/min | 8.8 | |
| Maximum pile driving speed | Longitudinal travel | m | 3.6 |
| Lateral travel | m | 0.6 | |
| Steering angle | ° | 10 | |
| Lifting/lowering travel | m | 1 | |
| Standard hoist | QY16D | ||
| Maximum hoisting length for center piles | m | 14.5 | |
| Ground pressure | Long ship | Kpa | 112 |
| Short ship | Kpa | 155 | |
| Border pile spacing | mm | 1045 | |
| Minimum corner pile spacing | mm | 1580 | |
| Maximum installable round pile clamping jaws | mm | 600 | |
| Maximum installable square pile clamping jaws | mm | 600 | |
| Optional pile clamping box | 6028/6014 | ||
Hydraulic Static Pile Driver
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Overall dimensions | Working length | mm | 13500 |
| Working width | mm | 7860 | |
| Transportation height | mm | 3242 | |
| Maximum pile driving force | tf | 600 | |
| Minimum pile driving speed | m/min | 0.7 | |
| Maximum pile driving speed | m/min | 5.8 | |
| Maximum pile driving speed | Longitudinal travel | m | 3.6 |
| Lateral travel | m | 0.6 | |
| Steering angle | ° | 8 | |
| Lifting/lowering travel | m | 1.1 | |
| Standard hoist | QY20C | ||
| Maximum hoisting length for center piles | m | 15 | |
| Ground pressure | Long ship | Kpa | 132 |
| Short ship | Kpa | 162 | |
| Border pile spacing | mm | 680 | |
| Minimum corner pile spacing | mm | 1100 | |
| Maximum installable round pile clamping jaws | mm | 600 | |
| Maximum installable square pile clamping jaws | mm | 600 | |
| Optional pile clamping box | 6032/6016 | ||
Hydraulic Static Pile Driver
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Overall dimensions | Working length | mm | 14000 |
| Working width | mm | 8360 | |
| Transportation height | mm | 3240 | |
| Maximum pile driving force | tf | 680 | |
| Minimum pile driving speed | m/min | 0.9 | |
| Maximum pile driving speed | m/min | 9 | |
| Maximum pile driving speed | Longitudinal travel | m | 3.6 |
| Lateral travel | m | 0.7 | |
| Steering angle | ° | 8 | |
| Lifting/lowering travel | m | 1.1 | |
| Standard hoist | QY20C | ||
| Maximum hoisting length for center piles | m | 15 | |
| Ground pressure | Long ship | Kpa | 137 |
| Short ship | Kpa | 168 | |
| Border pile spacing | mm | 600 | |
| Minimum corner pile spacing | mm | 1160 | |
| Maximum installable round pile clamping jaws | mm | 600 | |
| Maximum installable square pile clamping jaws | mm | 600 | |
| Optional pile clamping box | 6032/6016 | ||
Hydraulic Static Pile Driver
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Overall dimensions | Working length | mm | 14000 |
| Working width | mm | 8560 | |
| Transportation height | mm | 3320 | |
| Maximum pile driving force | tf | 860 | |
| Minimum pile driving speed | m/min | 0.8 | |
| Maximum pile driving speed | m/min | 7.7 | |
| Maximum pile driving speed | Longitudinal travel | m | 3.6 |
| Lateral travel | m | 0.7 | |
| Steering angle | ° | 8 | |
| Lifting/lowering travel | m | 1.1 | |
| Standard hoist | QY25C | ||
| Maximum hoisting length for center piles | m | 16.5 | |
| Ground pressure | Long ship | Kpa | 154 |
| Short ship | Kpa | 203 | |
| Border pile spacing | mm | 680 | |
| Minimum corner pile spacing | mm | 1160 | |
| Maximum installable round pile clamping jaws | mm | 600/800 | |
| Maximum installable square pile clamping jaws | mm | 600/450 | |
| Optional pile clamping box | 8016/6038 6036/6016 | ||
Hydraulic Static Pile Driver
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Overall dimensions | Working length | mm | 15122 |
| Working width | mm | 9160 | |
| Transportation height | mm | 3240 | |
| Maximum pile driving force | tf | 960 | |
| Minimum pile driving speed | m/min | 0.7 | |
| Maximum pile driving speed | m/min | 7.3 | |
| Maximum pile driving speed | Longitudinal travel | m | 3.6 |
| Lateral travel | m | 0.7 | |
| Steering angle | ° | 8 | |
| Lifting/lowering travel | m | 1.1 | |
| Standard hoist | QY25C QY35C | ||
| Maximum hoisting length for center piles | m | 16.5 | |
| Ground pressure | Long ship | Kpa | 148 |
| Short ship | Kpa | 196 | |
| Border pile spacing | mm | 995 | |
| Minimum corner pile spacing | mm | 1530 | |
| Maximum installable round pile clamping jaws | mm | 600/800 | |
| Maximum installable square pile clamping jaws | mm | 600/800 | |
| Optional pile clamping box | 8038/8016 6038 | ||
Hydraulic Static Pile Driver
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Overall dimensions | Working length | mm | 17315 |
| Working width | mm | 9160 | |
| Transportation height | mm | 3490 | |
| Maximum pile driving force | tf | 1060 | |
| Minimum pile driving speed | m/min | 0.7 | |
| Maximum pile driving speed | m/min | 7.8 | |
| Maximum pile driving speed | Longitudinal travel | m | 3.6 |
| Lateral travel | m | 0.7 | |
| Steering angle | ° | 5 | |
| Lifting/lowering travel | m | 1.1 | |
| Standard hoist | QY25C QY35C | ||
| Maximum hoisting length for center piles | m | 16.5 | |
| Ground pressure | Long ship | Kpa | 150 |
| Short ship | Kpa | 198 | |
| Border pile spacing | mm | 995 | |
| Minimum corner pile spacing | mm | 1530 | |
| Maximum installable round pile clamping jaws | mm | 600/800 | |
| Maximum installable square pile clamping jaws | mm | 600/800 | |
| Optional pile clamping box | 8038/8016 6038 | ||
Driver Pile Pipa Tenggelam
Immersed Pipe Pile Driver
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Main dimensions | Work leader | mm | 15800 |
| Working width | mm | 9160 | |
| High transport | mm | 3160 | |
| Maximum pile pressing force | tf | 1000 | |
| Number of pile driving cylinders | 4 | ||
| Maximum pile pressing speed | m/min | 4.3 | |
| Walking ability | Longitudinal stroke | m | 3.6 |
| Lateral stroke | m | 0.7 | |
| Corner | ° | 5 | |
| Standard crane | QY25 | ||
| Special options | Extubation device | ||
| Ground pressure | Long boat | kPa | 151 |
| Short boat | kPa | 188 | |
| Side pile distance | mm | 600 | |
| Minimum corner pile distance | mm | 1100 | |
| Can be equipped with the largest round pile jaw | mm | 800 | |
| Can be equipped with the largest square pile jaw | mm | 600 | |
| Side pile type | Plug-in | ||
Rangka Tiang Berjalan Elektro-Hidraulik
Electro-Hydraulic Walking Pile Frame
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Main electrical motor power/Rev | kW/rpm | 55/1470 | |
| Main winch | Pull force in single rope | kN | 91.5 |
| Speed | m/min | 0～17 | |
| Steel rope diameter | mm | 22 | |
| Needed rope length | m | 550 | |
| Vertical frame winch | Pull force in single rope | kN | 120 |
| Speed | m/min | 0～13 | |
| Steel rope diameter | mm | 22 | |
| Needed rope length | m | 230 | |
| Lifting hook winch | Pull force in single rope | kN | 20 |
| Speed | m/min | 16 | |
| Steel rope diameter | mm | 12 | |
| Needed rope length | m | 100 | |
| Pile frame stud | Stub Diameter | mm | φ920 |
| Stub Length | m | 24～39(42) | |
| Max. lifting force | kN | 700 | |
| Sliding rail | mm | φ102×600 | |
| Max. tilt angle (left and right) | ° | ±2 | |
| Crawler chassis and machine body | Vertical travel speed | m/min | Approximately 5 |
| Vertical Step length | mm | 3100 | |
| Horizontal l travel speed | m/min | Approximately 2.5 | |
| Horizontal step length | mm | 800 | |
| Vertical track shoe L | mm | 9500 | |
| Vertical track shoe W | mm | 1200 | |
| Horizontal track shoe L | mm | 6900 | |
| Horizontal track shoe W | mm | 1700 | |
| Swing speed | ° | ±10 | |
| Counterweight | t | 23(12+11) | |
| Machine dimension(L×W×H) | Working | m | 14×9.5×41 |
| Shipping | m | 13.5×3.4×3.3 | |
| Machine weight | t | Approximately 136 | |
| Ground pressure | MPa | 0.08 | |
Driver Pile Track Elektro-Hidraulik
Electro-Hydraulic Track Pile Driver
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Mast combination length | m | 21∼36 （optional 39） | ||
| Column barrel diameter | mm | Φ920 | ||
| Column rail center distance x rail diameter | mm | 600×Φ102 | ||
| The column allows the pull-up force | kN | 700 | ||
| Track ground width | Track retract | mm | 3380 | |
| Track Stretching | mm | 5080 | ||
| Track shoe width | mm | 860 | ||
| Track projection length on the ground | mm | 6333 | ||
| Tread | mm | 5425 | ||
| Lowest ground-off height | mm | 384 | ||
| Hydraulic main roll | Single-rope pull | kN | 120 | |
| Rope speed | m/min | 0～25 | ||
| Wire rope diameter | mm | 22 | ||
| Uplifted | Single-rope pull | kN | 120 | |
| Rope speed | m/min | 0～25 | ||
| Wire rope diameter | mm | 22 | ||
| Hydraulic Vice Roll | Single-rope pull | kN | 80 | |
| Rope speed (first layer) | m/min | 0～13 | ||
| Wire rope diameter | mm | 20 | ||
| The third volume of Yang | Single-rope pull | kN | 80 | |
| Rope speed (first layer) | m/min | 0～13 | ||
| Wire rope diameter | mm | 20 | ||
| Host power | kW | 55 | ||
| Walking speed | km/h | 0～0.26 | ||
| Swing speed | r/min | 0～0.5 | ||
| Hydraulic system pressure | MPa | 25/30 | ||
| Full machine transport dimensions (L x W x H) | m | 11×3.4×3.4 | ||
| Body weight | t | 62 | ||
| Total weight quality | t | 22 | ||
| Full machine ground ratio pressure (without working unit) | MPa | 0.1 | ||
| The quality of the whole machine | t | 160 | ||
| Maximum walking quality in full equipment | t | About 110 | ||
Rig Shaft Kembar
Twin Shaft Rig
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Leader Length | m | 21~36 |
| Leader Diameter | mm | 920 |
| Leader Rail Specification | mm | 102*600 |
| Max. lifting force | kN | 700 |
| Electric hydraulic pile driver power | kW | 55 |
| Maximum rear inclined angle of leader | ° | 5 |
| Left and Right tilt angle of leader | ° | ±1.5 |
| Pull force in single rope of main winch | kN | 120 |
| Max rope speed of main winch | m/min | 25 |
| Steel rope diameter of main winch | mm | 22 |
| Rope capacity of main winch | m | 530 |
| Max. lifting force of luffing winch | kN | 120 |
| Max. rope speed of luffing winch | m/min | 10 |
| Steel rope diameter of luffing winch | mm | 22 |
| Rope capacity of luffing winch | m | 175 |
| Max. lifting force of service winch | kN | 80 |
| Max. rope speed o auxiliary winch | m/min | 13 |
| Steel rope diameter of auxiliary winch | mm | 20 |
| Rope capacity of auxiliary winch | m | 100 |
| The third winch | ||
| Travel speed of machine | km/h | 0~0.26 |
| Swing speed | r/min | 0~0.5 |
| Rated torque of drill pipe | kN.m | 59/30 |
| Rated power of power head motor | kW | 220 (110*200） |
| Rated speed of drill pipe | r/min | 17/35 |
| Drill and stir diameter of single shaft | mm | 1200 |
| Drill pipe center distance | mm | 1000 |
| Power head output shaft center distance | mm | 900/1000/1200 |
| The host body weight | t | 62 |
| Counterweight weight | t | 22 |
| Machine weight | t | 145 |
| Average ground pressure | Mpa | 0.14 |
| Max. transport dimension of the host body | mm (L*W*H) | 10944*3300*3400 |
Rig Pengeboran Casing Penuh Lengan Tanpa Pancing Sendiri
Self-Propelled Full-Sleeve Full Casing Drilling Rig
Pertanyaan Online
Kirim pertanyaan dan kebutuhan Anda, kami akan segera menghubungi Anda mungkin.
karakteristik kinerja:
| Applicable outer diameters of casing pipes | mm | 600～1700 | |
| Rotary torque | kN.m | 320/ 500/ 700/ (ransient)1000 | |
| Rotary speed | r/min | 5.8/ 3.8/ 2.9/ (ransient)2.6 | |
| Casing lifting force | kN | 4560/(ransient)5320 | |
| Casing pressing force | kN | 400+270 | |
| Casing stroke and sledge | mm | 5660 | |
| Winding force of stroke and lift | kN | 400（Double rate） | |
| Pile lifting stroke of the power head's lifting piston | mm | 1200 | |
| Mass of the auxiliary jacketed pipe | t | 60 | |
| Lifting capacity of the hoist | t | 10（with the boom stretched out） 30（with the boom telescoped） | |
| Engine | Model | QSL9-C325 | |
| Rated power | mm | 242/2100 | |
| Lower vehicle | Track shoe width | kW/rpm | 860 |
| Travel ground pressure | kPa | 120（With the counterbalance weight and power head） | |
| Mass of the equipment | Total mass | t | 20 |
| without the power head and the counterbalance weight | t | 65 | |
| Counterbalance weight | t | 110 | |
| External Dimension（L × W × H） | Operation dimension | mm | 12406×2990×3583 |
| Transport dimension (with the power head) | mm | 15145×3360×3583 | |
| Transport dimension (without the power head) | mm | 10360×6450×13670 | |
JI.Prof.Latumenten Raya NO.26 Grogol Jakarta Barat-14440
Semua konfigurasi dalam daftar produk situs web ini didasarkan pada mesin yang sebenarnya. Untuk memenuhi kebutuhan pelanggan dan persyaratan hukum nasional yang relevan, Sunward akan meningkatkan teknologi produk secara berkelanjutan. SUNWARD Equipment Co., Ltd. berhak untuk memodifikasi konfigurasi dan spesifikasi di atas tanpa membuat diberitahukan secara terpisah.
Tautan Terkait :
